Stentor 1500

This Stentor 1500 OC is a very solidly built round-bilge ship with stabilization, suitable for longer (sea) trips and/or extended stays on board. This Vripack design with CE-A is characterized by its robust lines and offers maximum space within the 15 meters due to the fold-out bathing platform and its width of 5 meters. The luxurious mahogany interior is finished with leather sofas, Corian countertops, and Alcantara wall coverings. The deck salon and the comfortable helm provide a beautiful 360-degree view all around. Furthermore, there is a spacious kitchen with dinette, a generous “center-sleeper” master cabin, two bathrooms, and two guest cabins. The aft cockpit offers ample seating for 10 people. Via the fixed lazy stairs on the aft deck, you safely step onto the hydraulically folding swimming platform with access to the lazarette and the engine room, which are also comfortably accessible via a door in the master cabin. The 285 HP Vetus Deutz main engine has a Commercial Rating of 230 HP. The 4800 liters of fuel provide a transatlantic range. With the side door and the remote control for the hydraulic bow and stern thruster, the ship can easily be navigated by one person. This complete and ready-to-sail ship is further delivered with, among other things: Complete Simrad CX54 navigation system, soundproofing plates and heavy insulation for comfortable sailing and staying on board, large battery pack, central vacuum system, Siemens dishwasher, Quooker, 2 x luxury helm chairs, 40-inch 4K TV with surround system, Kabola central heating with hot water via ring line and circulation pump, storage in the aft ship with Siemens washing machine and freezer, 5-blade propeller, thrust bearing, De Waal seal propeller shaft seal, rubber fendering all around, fully closable cockpit tent, 2 x deck wash pump, spray system in waste water tanks and in both stainless steel anchor lockers with choice of drinking or outside water, hydraulically folding mast that allows a clearance height of 340 cm, searchlight, 2 x dynamo, 2 hydraulic anchor winches with stainless steel anchors, dual intake cooling water system for deep + shallow water, dual fuel filters, dual strainers, sink in engine room, stainless steel cleats all around, double heavy stainless steel railing all around, 2 x exits in railing. The hull was painted with Alexseal in 2016, the underwater ship was blasted and rebuilt in 2020, the superstructure was painted in 2020, and the teak deck in the gangways was re-rubbered in 2020. Currently, an office is situated in the forward cabin. With a small adjustment, this can be converted back into a 2-person cabin. For questions and/or to make an appointment, you are welcome at Elburg Yachting 7 days a week.