Tecnomar Velvet 90
One-click Contact
XPresented For Sale By:
Piantoni International
Italy
| Make | Tecnomar |
|---|---|
| Model | Velvet 90 |
| Year | 2003 |
| Condition | Used |
| Price | €740,000 |
| Type | Power |
| Class | Motor Yacht |
| Length | 26.97 m |
| Fuel Type | Diesel |
| Hull Material | Fibreglass |
| Location | Palermo, Palermo, Italy |
| LOA | 26.97 m |
|---|---|
| Beam | 6.27 m |
| Dry Weight | 112000 lb |
| Engine Type | Inboard |
|---|---|
| Engine Make | MTU |
| Engine Model | 16V2000M91 |
| Fuel Type | Diesel |
| Power | 2000 hp |
| Drive Type | Jet Drive |
| Engine usage (hours) | 1200 |
| Engine Type | Inboard |
|---|---|
| Engine Make | MTU |
| Engine Model | 16V2000M91 |
| Fuel Type | Diesel |
| Power | 2000 hp |
| Drive Type | Jet Drive |
| Engine usage (hours) | 1200 |
| Electrical Equipment |
|
|---|---|
| Electronics |
|
| Inside Equipment |
|
| Outside Equipment/Extras |
|
| Designer | Luca Dini |
|---|---|
| Builder | Tecnomar |
| Guest Cabins | 4 |
| Crew Cabins | 2 |
| Guest Heads | 4 |
| Crew Heads | 2 |
| Fuel Tanks | 1585 gal |
| Fresh Water Tanks | 396 gal |
| Hull Shape | Deep Vee |
| Hull Warranty | None |
Description
27 meters entirely dedicated to a warm welcome. The Velvet 90' increases the pleasure of livability by adding new spaces, inside and out. A wider cockpit and saloon. Maximum light which flows through the double side windowing, the ample windshield and through the crystal door. The nighttime area reserves the pleasure of four comfortable cabins, all with bathrooms and separate shower cubicles. The master suite, at the center of the craft, and the VIP suite, at the end of the bow, both have double beds while the guest cabins at the stern have twin beds. With its increased performance, the Velvet 90' guarantees a cruising speed of 35 knots with first class engines. In typical Tecnomar style, the interiors can be fully customized, both in the furnishings and the layout of the environments.
Annual haul-out and antifouling
Teak deck refurbishment
Replacement of bow and stern thrusters
Arneson surface drive overhaul (major service 2018)
Propeller balancing (2018)
Refurbishment of wooden gunwale and handrail polishing
Hull and superstructure polishing
Helm console refurbishment
Replacement of two helm seats and salon sofa refurbishment
Refurbishment of wheelhouse and saloon skylights
LED lighting upgrade in saloon and wheelhouse
Replacement of two Audison audio amplifiers
Replacement of saloon and partial guest cabin curtains
Renewal of guest cabin carpeting
Replacement of two grey water tanks
WC pump circuit overhaul
New exterior cushions, mattresses, sheets, blankets
Replacement of 3 SKY decoders
Installation of 2 new Samsung 32” TVs (Owner’s suite & saloon)
Installation of new LG oven
Replacement of protective tarpaulins (engine room & aft deckhouse)
Overhaul of 270 l/h watermaker
Sea intake inspection and servicing
Replacement of owner and guest cabin curtains
New crew cabin carpeting
New AEG electric oven
New Miele 4-burner induction hob
New Beko freezer
Exterior deckhouse wrapping
Interior and exterior furniture surface wrapping
Replacement of saloon sofa upholstery (covered & below deck)
Installation of 4 new TVs (22”, 28”, 28”, 38”)
Replacement of two sea cocks + inspection of remaining valves
Replacement of twin Kohler 21 kW generators
Replacement of fuel tanks in stainless steel
Overhaul of upper Arneson pistons and flap pistons
Overhaul of gangway hydraulic system
Exhaust manifold flange replacement (starboard)
Bilge and engine room painting
Replacement of hydraulic pipes (garage door & flap system)
Replacement of non-return valves
Crew shower restoration
Painting of stern seating and shower trays
Replacement of black water tank float
Generator service and float replacement
Fire pump inspection and partial pipe replacement
Engine room washdown system pipe replacement
Air conditioning service & refrigerator maintenance
Structural foam reinforcement (engine room hatch)
Disassembly, repair and repainting of bow seating, doors & external frames
Carpentry works and furniture refinishing
Cleaning of sea inlet filters + glass and gasket replacement
Gunwale and table repainting
Bilge pump maintenance & pipe replacement
Anchor restoration and repainting
Ongoing maintenance: teak cleaning, sealing of engine room floorboards, sewage tank cleaning
Replacement of turbines (new)
Engine Notes
- 2x 2033 Hp MTU Shaft line, Arneson, Hydrojets
Disclaimer
The Company publishes the details of this vessel in good faith and cannot therefore endorse or guarantee the accuracy of such information
Presented For Sale By:
Piantoni International
Italy
Presented For Sale By:
Piantoni International
Italy