Ferretti Yachts 68

Accommodation and Layout

The design sleeps 8 incorporating a central, full-width owner's cabin & VIP in the bow - both en-suite and a twin and a bunk cabin sharing a bathroom. The crew cabin is accessed from the aft cockpit and currently offers a single bed (another bunk could easily be installed) and a bathroom. The second crew cabin was converted from new, creating access to the master cabin, a walk in wardrobe and a huge cold storage area with fridge and freezer.

The beige leather in the saloon and dining area have been maintained and the gloss cherry woodwork is in good condition throughout. The port saloon sideboard has been enlarged to incorporate much more storage and a rise/fall flatscreen TV. Various headlinings have been changed

• All interior lighting converted to LED
• Condaria chilled water air conditioning (compressors 2021) 
• Tecma toilets Holding tank

Navigation and Electronics

• Hydraulic steering and electronic engine controls with 3rd station in the aft cockpit. 
• Side Power bow and stern thrusters
• Battery upgrade to stern thruster improving power
• 2 x Raymarine hybrid touch plotters main helm & flybridge (2022)
• Raymarine autopilot main helm & flybridge (2022)
• Raytheon radar (original)

Electrical Systems

• Kohler 19kW approx. 2014 (2539h @ 08/24)
• Onan Generator approx. 2019 
• Glendinning cable master for shore connection  

Galley and Laundry

• Enclosed galley layout with new flooring and worktops in matt black synthetic stone
• Opening side window and door to side deck
• New induction hob with variable cooking area
• Extractor fan 
• Bosch slim dish washer
• Bosch oven / micro / grill
• Ignis fridge/freezer Ice maker in aft cockpit 
• Washer in crew area
• Dryer in crew area  

Deck and Tenders

The teak decking to the whole vessel was replaced previously and added to the flybridge.

• Extended bimini top in stainless steel and canvas 
• Flybridge sunbathing pad with raised head rest and storage under
• Fly bar with sink, fridge and cooking top
• 2 x anchors stowing in the bow
• 2 x stainless steel anchor winches for chain / rope
• 2 x Quick stern winches (2023/24)
• Oversize mooring cleats and fairleads 
• Extended Besenzoni stainless steel & teak pasarelle (approx. 2017)
• Large bathing platform with huge storage area underneath
• Large bow sunbathing pad
• New fixed aft deck table in stainless steel and teak 
• Williams 325 jet RIB (2017)
• NO JET SKI  

Safety Equipment

• Life raft for 12 persons EPIRB 
• Life rings 
• Equipment required for Spanish flag 
• Auto-electric bilge pumps throughout 
• Extra bilge pump for engine room for cleaning purposes
• Fire extinguisher system is up to date and serviced

Additional Information

The owner plans to change the 4 x cutlass bearings and replace shaft seals + service engine cooling system included in the asking price. 

• Air compressor for diving  Idromar water maker 220l/h (2023) 
• Engine exhausts refurbishment and new insulation (2023)
• 2 x spare propellers 
• 1 x spare propeller shaft
• Dual 24V fresh water pumps for redundancy 
• Radar mast modified for easier crane operation 

  Recent Works

• Engine service & clean of intercoolers
• Generator service
• Antifoul & anodes
• Full polish
• 4 x cutlass bearings
• New shaft seals
• Service underwater lights
• Service to air-conditioning & water maker

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.