Search Boats for Sale
Advertisement

Oyster 575

$1,829,086 Listed price: US$1,300,000

Presented For Sale By:

Oyster Brokerage (USA)

Newport Shipyard
One Washington Street
Newport, RI, 02840
United States
+1 401 846 7400

View Seller Inventory
 

One-click Contact

X
* We weren't able to post your message, please check the highlighted fields and try again.

Thanks

We have sent your information directly to the seller.

Request cannot be completed

You may have entered incorrect information or the server is temporarily down. Please reload this page and try again later.

One-click Contact

X
* We weren't able to post your message, please check the highlighted fields and try again.

Thanks

We have sent your information directly to the seller.

Request cannot be completed

You may have entered incorrect information or the server is temporarily down. Please reload this page and try again later.

Make Oyster
Model 575
Year 2012
Condition Used
Price US$1,300,000
Type Sail
Class Cruiser
Length 17.89 m
Fuel Type Diesel
Hull Material Fibreglass
Location Annapolis, Maryland, United States
LOA 17.89 m
Length at Water Line 15.72 m
Beam 5 m
Max Draft 2.06 m
Displacement 62280 lb
Max Bridge Clearance 25 m
Engine Type Inboard
Engine Make Volvo Penta
Engine Model D3-150
Fuel Type Diesel
Engine Year 2017
Power 150 kW
Propeller Type 4 Blade
Folding Propeller Yes
Rope Cutter Yes
Engine usage (hours) 611
Covers
  • Bimini Top
  • Spray hood
Electrical Equipment
  • Shore power inlet
  • Generator
  • Inverter
Electronics
  • Depthsounder
  • Radar
  • Log-speedometer
  • Radar Detector
  • Wind speed and direction
  • Computer
  • Repeater(s)
  • TV set
  • Plotter
  • DVD player
  • Autopilot
  • Radio
  • Compass
  • GPS
  • Cockpit speakers
  • VHF
Inside Equipment
  • Bow thruster
  • Washing machine
  • Electric bilge pump
  • Oven
  • Manual bilge pump
  • Microwave oven
  • Air conditioning
  • Heating
  • Hot water
  • Refrigerator
  • Fresh water maker
  • Deep freezer
  • Battery charger
Outside Equipment/Extras
  • Teak cockpit
  • Cockpit shower
  • Teak sidedecks
  • Gangway
  • Davits
  • Radar reflector
  • Tender
  • Liferaft
  • Cockpit cushions
  • Cockpit table
  • Swimming ladder
Rigging
  • Steering wheel
  • Electric winch
  • Spinnaker pole
Sails
  • Furling mainsail
  • Gennaker/Cruising spinnaker
  • Furling genoa
Designer Oyster Design Group
Double Berths 2
Twin Berths 2
Headsail Area 2
Fuel Tanks 1400 litres (GRP)
Fresh Water Tanks 950 litres (GRP)
Windlass Electric Windlass
Liferaft Capacity 8

Description

BROKER'S COMMENTS

New Listing! Shoal draft 575 extensively refit and upgraded by Oyster with deck improvement works and a new engine. Lovingly cared for and offered for sale by her original owner.

The Oyster 575 is a popular bluewater cruising yacht from the dynamic design
partnership of Oyster Yachts and Humphreys Yacht Design.

Pure hull lines from Humphreys Yacht Design make the Oyster 575 a fast passagemaker and an effortless bluewater cruising yacht. She boasts an exhilarating
performance that placed her as the perfect Oyster for the nine owners who chose her
as their entries for the 2017-19 Oyster World Rally.

OYSTER 575 - A LUXURY SAIL BOAT BUILT TO ROAM THE WORLD’S OCEANS.

Any unauthorised copying or publishing will constitute an infringement of copyright.

The items in italic highlight the non-standard items fitted during the build programme or added by the owner thereafter.

**Available for Co-brokerage only with prior agreement**

If you have any questions about this specification please either email brokerage Brokerage@oysteryachts.com

Or contact our team on the following: 

UK & IRELAND
Rupert Knox-Johnston
T: +44 (0) 1473 851 430
E: Rupert.Knox-Johnston@oysteryachts.com

AMERICAS
Dan Wurzbacher
T: +1 401 924 3434
E: Dan.Wurzbacher@oysteryachts.com

REST OF WORLD
Jamie Collins
T: +34 677 429 116
E: Jamie.Collins@oysteryachts.com

Interested in another size of boat? Or just need peace of mind that this specification is your dream Oyster? Either way check out our live listings on our website : https://oysteryachts.com/sailing-yachts-for-sale/brokerage-listings

SPECIFICATION

YEAR - 2012
DESIGN - Oyster Design Group
RIG - Cutter with in-mast furling
ACCOMMODATION - Eight berths in four cabins
JOINERY - Cherry
VAT STATUS - US Duty Paid
LOA - 17.89m (58’8”)
LWL - 15.72m (51’7”)
BEAM - 5.00m (16’5”)
DRAFT - 2.06m (6’9”)
DISPLACEMENT - 28,250kg (62,280lb)
AIRDRAFT - 25.00m (82’0”)
LYING - Annapolis, Maryland

BROKER'S COMMENTS

New Listing! Shoal draft 575 extensively refit and upgraded by Oyster with deck improvement works and a new engine. Lovingly cared for and offered for sale by her original owner.

The Oyster 575 is a popular bluewater cruising yacht from the dynamic design
partnership of Oyster Yachts and Humphreys Yacht Design.

Pure hull lines from Humphreys Yacht Design make the Oyster 575 a fast passagemaker and an effortless bluewater cruising yacht. She boasts an exhilarating
performance that placed her as the perfect Oyster for the nine owners who chose her
as their entries for the 2017-19 Oyster World Rally.

OYSTER 575 - A LUXURY SAIL BOAT BUILT TO ROAM THE WORLD’S OCEANS.

Any unauthorised copying or publishing will constitute an infringement of copyright.

The items in italic highlight the non-standard items fitted during the build programme or added by the owner thereafter.


1 . CONSTRUCTION

HULL NUMBER Oyster 575/12.
HULL CONSTRUCTION A composite construction, moulded using a combination of vinylester and polyester resin with the outer topside finish in a white special NPG gelcoat. Laminate material comprises a combination of E-Glass, Kevlar and Carbon Fibre.
The topside laminate incorporates a high-tech, balsa-cored, E-Glass/Carbon sandwich above the waterline, for additional strength, stiffness and insulation.
Below the waterline, the hull features a monolithic (single-skin) composite laminate, with an Aramid/Kevlar layer, reinforced with a matrix of stringers and floors.
Combined with BS1088 standard marine-ply structural bulkheads, this produces a robust structure, with excellent strength to weight qualities and proven longevity.
Additional reinforcements are included in the way of the keel recess, the keel longitudinals, mast bulkhead, P-bracket, forestay and hull stringers. Limber holes and/or tubes are installed at appropriate points.
Stringers, bulkhead landings and floors are formed over a non-structural, inert, polyurethane foam.

HULL FINISH White hull with cove line and double boot top lines in standard Oyster blue. Hull and topsides cut and polished (2016).
Hull bottom re-antifouled, and all hull exterior zinc anodes replaced (2016).
Ultra 20 Series II electronic antifouling system fitted with two ultrasonic transducers (2016).

DECK CONSTRUCTION Moulded in GRP with balsa core.
Oyster 575 deck styling sets new industry standards, with modern flowing lines providing sleek looks inside and out, whilst maintaining the Oyster trademark and reputation for a light and airy deck saloon.

DECK FINISH Teak laid decks. Deck improvement work, and non-slip deck areas repainted (2019).
The deck edge incorporates a bulwark, which facilitates relatively flat side decks.
The top of this bulwark has a clean GRP finish, giving a modern and stylish ‘rolled’ edge, enhancing the yacht’s visual appearance with a graceful sheer line.

KEEL Shoal keel.

RUDDER Fully protected skeg-hung rudder (serviced 2016).

STERN DESIGN ‘Sugar scoop’ transom design incorporating a platform instep, which is especially useful for bathing and boarding and is trimmed with laid teak. Two stainless steel steps with teak tread inserts are fixed on transom for access to the stern deck.
Fold-down stainless steel bathing/boarding ladder with oval rungs, fitted with a lanyard and retaining pin for retrieval/stowage.

EURCD Built to comply with the requirements for Category A – Ocean.

 

2 . DECK LAYOUT AND EQUIPMENT

ANCHOR Stainless steel Wasi anchor with 100m of stainless steel chain, and swivel.
Modification to stemhead to accommodate the Wasi anchor.
Lightweight folding alloy Fortress FX55 kedge anchor with 100m of 18mm Octoplait nylon warp and 10m of 10mm chain.
5 x 20m, plus 2 x 15m mooring warps.
Recessed locker within the foredeck for anchor chain stowage, fitted with hinged lids and a stainless steel, clamp-type locking device.
Partitioned anchor locker with kedge anchor stowage.

WINDLASS Lewmar V4 vertical capstan type (24V) electric anchor windlass, two-way and operated by adjacent stainless steel foot switches. Windlass serviced (2016).
Remote windlass control switch in cockpit.

DECK ACCESS Pair of gateway stanchions and side gates for boarding.
Stainless steel threshold plates at side gates and stern gate, with boat name engraved on each plate.
Side boarding ladder to both side gates with leather protection.
Gate to pushpit.
Stainless steel bathing ladder with teak treads.
3.2m Multiplex carbon passerelle, including brace lines and bag (15kg). Passerelle halyard 12mm braid with sheave and exit in mast and XCS clutch.
Passerelle socket in top transom rung.

HATCHES/ WINDOWS Oyster custom drop-down, tinted acrylic, vertical sliding washboard system to companionway. Mosquito screen to companionway hatch (2016).
Lewmar alloy-framed deck hatches.
Gebo alloy-framed opening coaming portlights.
Alloy-framed, custom-made deck saloon windows in toughened/laminated, smoked glass - two outboard, forward windows open.
Gebo alloy-framed opening hullports.
Long Gebo Econoline portlight from aft starboard cabin to cockpit with flyscreen and curtain.

CANVASWORK All canvaswork in ‘Heather Beige’ acrylic (unless otherwise stated):
Large acrylic fold-down companionway sprayhood with leather covered stainless steel grab rail to aft end. The hood incorporates see-through panels in its forward portion. Central zip up window. Leather replaced on sprayhood aft hoop (2016).
Bimini to suit four-pole arrangement (2016) with fixtures and stowage bag. Three windows in bimini for boom light, and helmsman to view sail.
Acrylic canvas cockpit table cover with mesh storage pockets, and two velcro opening flaps to allow access to the refrigerated insulated box (replaced 2016).
Pedestal and steering wheel covers.
RIB cover, including over davits with tourney poles.
Windlass and winch covers for all winches (replaced 2016).
Cockpit, pushpit and helm seat cushions in EZ-Dri foam and covered in Perennials ‘Tatami Stripe’ acrylic. Cleaned/repaired (2016).
Pushpit and helm seat backs in Perennials ‘Hello Sailor!’ acrylic, piped with grey from ‘Tatami Stripe.’

DECK PLUMBING Hot and cold freshwater deck shower in transom locker.
Freshwater anchor/deck wash pump in bow, including hose.
Freshwater outlet in port aft locker.
Saltwater anchor/deck wash pump in bow, including hose.

COCKPIT Walk-through teak-laid cockpit, self-draining through outlets.
Instrument repeaters installed on dark acrylic panel mounted on GRP console integral to the companionway hatch garage.
Twin cockpit steering positions each feature custom-designed Oyster lectern style pedestal tops, mounted on a GRP moulded base. Each helm seat has an upholstered backrest, fitted to a strong stainless steel frame. Under each helm seat is a locker with hinged GRP lid.
Between the two helm seats a central walkway and steps aft allow easy access into
and out of the cockpit, to and from the yacht’s stern deck.
2 pairs of waterproof stereo loudspeakers.
Stainless steel double drinks holders - one below each of the two pedestal lecterns and one on each side of companionway.

COCKPIT TABLE Gloss varnished, teak-topped cockpit table, permanently installed with stainless steel frame, folding leaves and insulated GRP box, refrigerated via a Frigomatic 24V (keel-cooled) refrigeration unit. Cockpit table revarnished (2016).

STEERING Twin Oyster designed custom pedestals. Leather covers to both pedestal grab rails (replaced 2016). Each pedestal incorporates a permanently engaged 1.02m (40”) diameter stainless steel wheel with friction brake (wheels replaced 2016). Steering wheels covered with brown suede leather, which extends to partially cover the spokes.

DAVITS Cooney S300 electric davits (300kg maximum total load) complete with belly bands and dinghy locater kit. Set of four leather davit pads. Davits serviced and Dyneema kit fitted (2016).

GENERAL All deck gear inspected, serviced, repaired/replaced/upgraded, as necessary (2016).
Stainless steel pulpit and pushpit.
Stainless steel C-Quip ‘AQ 300’ folding cleats for mooring. Pair of additional C-Quip folding cleats on aft deck, with stainless steel chafe strips to facilitate Mediterranean mooring. Pair of Schaefer XCL 60 fairleads on aft deck cap rail position.
Stainless steel cockpit cleats for sheets.
6 x GRP dorade boxes with stainless steel cowls (aft units under deck). Stainless steel guard rails over the four forward units, plus additional pair for aft units. Pair of large Wichard pad eyes aft of two dorade guards for halyard parking.
Sun deck forward of the coachroof.
Stainless steel grab rails to deck saloon roof top. Additional stainless steel grab handles on transom.
Stainless steel upholstered backrest rails fitted at helm positions.
Large full-width lazarette locker with twin stainless steel gas struts fitted to lid. Folding step within the lazarette for easy access.
Stainless steel bar in lazarette to hang lines. Removable shelf on starboard side of lazarette with small fiddle for retaining crates. Small fiddle on lazarette floor below with four U-bolts for retaining rope. Shelves with fiddled edge on port side of lazarette for additional stowage of soft items. ‘Dive Buddy’ fittings for two dive cylinders in lazarette.
Two built-in, self-draining deck stowage lockers at aft end of coachroof, each with a single gas strut on lid.
Life raft storage built into pushpit on starboard side, with hydrostatic release.
Stern quarter pushpit seats in teak and stainless steel, with upholstered seat backs.
2 x stainless steel pole on aft deck for navigation/communications aerials, incorporating an aft deck floodlight, switched at pedestal. Additional remote control for light.
Gas locker for two bottles. Fitting in gas locker lid to allow gas hose to pass through for BBQ.
Ensign bracket on davit.

 

3. RIG AND SA IL HANDLING

MAST AND RIGGING By Formula Masts. Full inspection and service of spars by Formula Masts (2016).
Cutter rig with in mast furling, and all associated hardware and fittings. Formula white painted mast and boom. Repainted (2016).
Formula Stoway hydraulic drive with power pack. Furling control buttons on both pedestals.
Formula spreaders and fittings for discontinuous wire rigging. Running rigging, and blocks. All rigging inspected (2019).
Upgraded topping lift to 12mm Spectra/Dyneema for use as topping life/second main halyard with XCS mast clutch, stainless steel spreader bar, wires and stays.
Hydraulic reversing outhaul cylinder in boom with manual bypass valve. Serviced (2016).
Preventer lines.
2-function remote control panel in cockpit for manually operated hydraulic backstay and vang. Backstay and vang serviced by Holmatro (2016).
Conduit for masthead instrument wiring. Extra conduit to masthead for TV antenna and cell phone aerials.
Ion dissipater on masthead with cap shroud chainplates and mast step bonded to keel bolt with stainless steel tang and heavy-duty cable.
Status omni-directional aerial mounted at masthead for FM/TV.

HEADSAIL FURLING Reckmann hydraulic furling on headstay, with repeater at each pedestal.
Reckmann hydraulic furling on staysail, with repeater at each pedestal.
Both units serviced by Reckmann (2016).

WINCHES By Lewmar. All winches serviced (2016).
2 x 68 CEST two speed, electric, chrome, self-tailing primary winches.
2 x 54 CEST two speed, electric, chrome, self-tailing secondary winches.
1 x 54 CEST two speed, electric, chrome, self-tailing mainsheet winch.
2 x 50 CST two speed, chrome, self-tailing, mainsail and genoa halyard winches.
1 x 30 CST two speed, chrome, self-tailing mainsheet traveller control line winch.
1 x 58 CEST two speed, electric, chrome, self-tailing halyard winch at mast base, with three upstands and tie rod.

SPINNAKER GEAR Single spinnaker pole stowed vertically on mast with butt hoist winch. Package includes pole topping lift and foreguy, two halyards, pair of sheets, guys, blocks and fittings.

SAILS By Dolphin Sails. All sails upgraded to DYS Spectra/Dyneema and polyester taffeta laminate to a tri-radial design. Tenara thread.
Mainsail (replaced 2016).
Yankee - 130% (replaced 2016).
Staysail (replaced 2016).
McLube Sailkote treatment to all three white sails (2016).
Cruising chute - 1.5oz Rip Stop, three colours, rocked radial design, including Size 4 squeezer.
Cover.

 

4 . INTERIOR

GENERAL Eight berths in four cabins, excluding the saloon, and two heads/showers. All sea berths have fitted Dacron lee screens with lanyards to through-bolted eyes.
Interior joinery finished in cherry. All joinery inspected, sanded, and revarnished/ repainted, as necessary (2016). Handrails throughout in oval cherry timber.
Designed to be modern and coordinated, whilst remaining practical and durable at sea. Essential features include sculpted fiddles and grab rails, ‘shadow-gap’ joints between panels, solid ‘framed’ styled doors with laid veneers, and Oyster custom knobs for lockers and drawers. All drawers have metal runners, which give extremely smooth operation.
Hanging lockers lined with cedar wood ply panels. Lockers fitted with shelves and fiddles, as appropriate.
Headlining in off-white vinyl. Removable foam backed mast cover in headlining vinyl with velcro (replaced 2016).
All mirrors bevelled, including those in heads.
Teak veneered sole boards with plank effect, including aft cabin. Inspected, sanded, and revarnished, as necessary (2016).
Galley horizontal work surfaces finished in ‘Honey Crunch’ satin finish Avonite with upstand surrounds and stainless steel basin inserts, incorporating routered draining
grooves adjacent to one sink. Avonite surfaces refinished (2016).
Each head compartment is fitted out with a moulded washbasin set into a flat solid gloss-finished ‘Pearl’ Avonite surface. Avonite surfaces refinished (2016).
Hansgrohe quality mixer taps and shower controls are installed, together with matching towel rail, toothbrush tumbler, soap dispenser and toilet roll holder.
Jabsco Quiet Flush electric freshwater flush toilets in both heads, each fitted with a large porcelain bowl. New macerators and ceramic impellers fitted to toilets (2016).
Head compartments are fitted with a GRP lower moulding with well radiused corners for ease of cleaning. Showers are separated from toilet areas by a hinged door.
Upholstery for the saloon settees, headboards, berth surrounds and navigator’s seat in ‘Commodore Blue’ Alcantara, stitched panel styling. Two saloon backrests reupholstered (2016).
Crew covers for saloon and chart table seating in JAB ‘Sailor’ fabric.
High quality composite foam mattress to owner’s aft berth. Mattress protectors to all berths. Cleaning/repair of mattress covers (2016).
Oceanair Skysol blinds to deck saloon windows (serviced 2016). Mosquito screens added to forward saloon opening windows (2016). Roman blinds to saloon, aft cabin, starboard aft and port forward cabin hullports. All coachroof blinds, including forward cabin hullport and heads, are Oceanair blackout. Oceanair skyscreens with integral mosquito mesh to all deck hatches.
Caframo Bora (24V) fans in black.

FORWARD DOUBLE CABIN Spacious guest cabin in the bow with centreline double berth and two drawers beneath.
Two lift-top bins in side shelving, a large shelved clothes locker to port, and hanging locker to starboard.
Vanity mirror fitted to hanging locker door.
Deck access via forehatch.

PORT FORWARD TWIN CABIN
Situated aft of the forecabin to port, with upper and lower berths.
Mattresses upgraded to 5” profiled foam.
Hull-side lockers for clothes, a bedside cabinet with shelved locker, and large hanging locker with two drawers beneath.
Small lockers beneath the lower berth, accessed either via removable lids in the bunk top or a drop-down locker door in the berth front.
Vanity mirror fitted on the aft bulkhead.
Locker on aft bulkhead above vanity unit with double, bevelled mirrored doors, and fiddled shelves inside.
Timber corner posts in hullport to suit Roman blind.

SHARED HEAD/DAY HEAD Large head compartment to starboard, shared by the forward cabins, accessed from the passageway, incorporating a toilet, washbasin and separate shower stall.
Folding hooks fitted in shower for hanging oilskins.
Upper locker with mirrored door and stowage beneath basin.
Lockers for wash bag and towel stowage.
Timber corner posts in hullport to suit Roman blind.
Magnifying mirror fitted near basin on shower bulkhead, and towel ring fitted below it.
110V heated towel rail.
‘Cascade’ non-slip flooring.

SALOON Access to the saloon from the cockpit is via shaped timber and stainless steel companionway steps. Steps stripped and revarnished (2016). Two stainless steel grab handles are fitted either side of the companionway opening.
The deck saloon is extremely light and airy with seven windows, of which two of the three forward ones open. There are also two opening hull portholes.
Featuring a rectangular table and large settee area to port, outboard of which are a pair of lockers and central shelf to the hullport. Timber seat back and laminated cherry handrail modification near galley, with full-length seat cushion.
Three-seater L-shaped settee to starboard. Outboard of this and forward is a locker and central shelf to the hullport area.
The saloon table is designed to form, in its closed position, an occasional table, which is mounted on a very substantial pedestal incorporating a bottle locker in its base. Saloon table cover with two handhold cut-outs (replaced 2016).
The teak tabletop is a veneered panel with solid timber edging and handhold cutouts.
This table extends with a hinging central infill piece (stored in the pedestal top when not in use) to form a large dining table. Two director’s chairs (with appropriate storage) upholstered in ‘Tatami Stripe’ fabric, provide extra in-harbour seating at the table or on deck.
Flat screen TV on a motorised lift, starboard side.
Ice maker under forward port inboard saloon seat.
Cherry box for Steiner binoculars, above starboard cabin door frame.
Timber corner posts in hullport to suit Roman blind.
Bookshelves.

NAVIGATION AREA Situated at the aft starboard end of the saloon, the chart table is customised around the flush-mounted electronics and navigation equipment, which is strategically sited and housed in a dark grey Alcantara fascia panel (re-covered 2016), and positioned for optimum viewing.
The chart table can accommodate a half-folded Admiralty chart, and there is a bookshelf outboard of this for a nautical almanac and pilot books.
There are two drawers beneath the chart table. A stainless steel stay is fitted on the chart table lid.
AC and DC electrical panels located behind navigator’s seat, fitted with hinged acrylic doors to protect switches from being accidentally operated.

GALLEY Located to port of the cockpit in the passageway to the aft cabin, where removable panels give access to the engine compartment. Above the sinks an opening portlight provides fresh air and natural daylight from the cockpit when at anchor.
Large locker opposite refrigerator fitted out with shelves and baskets for galley equipment stowage. Sliding rubbish bin system fitted in locker, just forward of sinks.
Locker at forward end of galley fitted out with washer/dryer.
Stowage for crockery and glasses, drawers for cutlery and kitchen utensils.
Outboard of the cooker, below the hullport, is a small stowage shelf with stainless steel retaining bar. Shelves fitted in galley sliding lockers forward and aft of oven.
Timber knife block for Henckels knife set, mounted in galley bulkhead.
Unnatural flooring in ‘Bronze’ to galley floor (2016).

SINKS Twin stainless steel sinks. Chopping board to fit over one sink.
Soap dispenser at galley sink for washing up liquid.

COOKER/HOB Gimballed Force 10 cooker in stainless steel with 5-burners, grill and oven, all protected by a flame failure gas cut-off device. The cooker incorporates an electronic ignition system for all functions. Oven, and gas hoses/regulator checked and repaired, as necessary (2016).
Heavy gauge fiddle rail fitted around top of cooker, which incorporates a pair of adjustable clamping pan-holders. Harbour lock and cooker crash bar. Double fiddle rail outboard of cooker. For additional safety an electric gas solenoid valve controls the gas flow from the bottle and is operated remotely by an illuminated rocker switch near the cooker.
Fire blanket fitted above inboard counter.

MICROWAVE Panasonic (110V) microwave oven.

REFRIGERATOR/FREEZER
Frigomatic 24V (keel-cooled) front-opening stainless steel refrigerator with stainless steel shelves and retainer bars, and automatic door light. Serviced, plus integral fan and heated door seals fitted (2016).
Frigomatic W80 compressor with integrated plate for stainless steel (water-cooled) freezer box. Carel temperature control fitted (2016).

WASHER/DRYER Splendide (110V/60Hz) washer/dryer in locker at forward end of galley.

DISHWASHER Fischer and Paykel (110V) single dish drawer in locker forward of refrigerator.
Locker beneath dish drawer modified to a drawer with timber front, and shaped hamster basket attached to back to maximise stowage.

HOT WATER TAP Quooker instant hot water tap (240V unit with it’s own transformer to run from 110V supply).

ENGINE ROOM Insulated with a composite of foam and high density polymer sound absorbing materials, the engine room access is via two doors within the starboard midship cabin or by removable panels beneath the galley sinks to port.
Access panels are fitted with rubber sealing strips to minimize noise and secured by positive catches.
24V lighting and extractor fan.
Exposed GRP surfaces painted with intumescent paint. Fire blanks to engine room air inlets/outlets with remote activation of fire extinguisher.

STARBOARD MIDSHIP TWIN CABIN
Aft of the saloon on the starboard side the midship twin cabin is designed with upper and lower berths. Mattresses upgraded to 5” profiled foam.
Small locker beneath the lower berth and hull-side lockers above the top berth.
Vanity mirror above the aft low-level locker.
Locker on shower bulkhead for Racors and watermaker. Shelved locker above watermaker locker.
Removable bar running fore and aft fitted above cabin door for hanging wet oilskins.

OWNER’ S STATEROOM Configured with a double berth offset from centreline, complete with twin drawers beneath. Abundant drawer and locker space.
Aft facing desk to starboard with bookshelf and locker beneath, locker adjacent to the berth and locker outboard both forward and aft of the seat. Large hanging locker and sliding door stowage installed to port. Large bevelled mirror inside starboard hanging locker door. Locker outboard and aft to port.
Forward beneath the cockpit is a vanity mirror over a shelf, with drawer and locker beneath.
Timber corner posts in hullport to suit Roman blinds.
4-brick safe with digital keypad, flush fitted in starboard wardrobe. 2-brick safe with digital keypad in port hanging locker.
TV in recess. Two timber doors fitted to engine room bulkhead to cover recess with spring stays for viewing TV.
Access to the aft toilet and shower compartment to starboard.
Door to port leads through to galley.

ENSUITE HEAD/SHOWER Incorporating a toilet, washbasin and separate shower stall. Shower mixer unit replaced (2016). Folding hooks fitted in shower for hanging oilskins.
Locker beneath washbasin and mirrored locker above. Lockers for wash bag and towel stowage. Magnifying mirror fitted near basin on shower partition. Towel ring.
110V heated towel rail.
‘Cascade’ non-slip flooring.

 

5. ENTERTAINMENT

AUDIO VISUAL SYSTEMS

SALOON Lift up Samsung 26” (US Spec) TV.
Upgraded to Fusion AV750 marine entertainment system with DVD/tuner and Bluetooth (2016).
Upgraded to Fusion 4-channel amplifier (2017).
Upgraded to Alpine subwoofer amplifier (2017).
Kaleidescape movie server.
4 x Anthony Gallo semi-flush speakers.

COCKPIT Upgraded to Fusion AV750 marine entertainment system with DVD/tuner and Bluetooth (2016).
Upgraded to Fusion NRX300 remote control (2016).
Upgraded to four JL Audio waterproof cockpit speakers (2017).

OWNER’S STATEROOM
Samsung 22” (US Spec) TV.
Upgraded to Fusion AV750 marine entertainment system with DVD/tuner and Bluetooth (2016).
Two JL Audio speakers in headlining. 

 

6. ENGINEERING

ENGINE Turbo charged, 5-cylinder (12V start) Volvo Penta D3-150 engine (2017). This unit delivers maximum potential power of 150hp (110kW) at 3,000rpm. One of the few modern marine engines meeting both the EURCD and the USA EPA Tier 3 emissions requirements.

ENGINE HOURS Approximately 611 at April 2022.

PROPELLER Upgraded to 24” diameter 4-bladed Brunton Varifold folding propeller (2016).
Propspeed foul-release coating applied to protect propeller, shaft and P-bracket (2016).

ROPE CUTTER Ambassador rope cutter on shaft.

ALTERNATORS The engine is fitted with twin alternators. One 120A/12V alternator to charge the engine start batteries. The second unit is a Mastervolt 110A/24V alternator (replaced 2016) that charges the domestic batteries via a Mastervolt Alpha-Pro 3-stage regulator (replaced 2016).

GENERATOR Onan 11kW (220V/60Hz) generator with electric oil change pump. Serviced (2016).

GENERATOR HOURS Approximately 2,484 at April 2022.

BOW THRUSTER Sleipner SE170 (10.7hp) 250mm tunnel bow thruster with twin counter-rotating propellers. 24V DC electric power comes from dedicated thruster batteries. Serviced (2016).

STEERING SYSTEM Whitlock Constellation cable and Mamba torque rod system. Serviced (2016).

HYDRAULICS Lewmar 400-4 Commander system (twin motors) located in sail locker to operate mainsail, headsail, staysail furling, and hydraulic outhaul function. Serviced (2016).

AIR CONDITIONING Cruisair Stowaway Turbo air conditioning system, comprising of three units giving a total of 40,000 BTUs:
2 x 12,000 BTU units at 60Hz.
1 x 16,000 BTU unit at 60Hz.
Serviced, tested, and repaired as necessary. Forward unit replaced (2016).

HEATING Centrally heated throughout via Webasto DW Thermo 90 water heating – 6 fan coils. Fire protection fitted to lazarette mounted heater.
Serviced, coolant changed, and repaired as necessary. Saloon heater unit replaced and system bled (2016).

ICE MAKER U-Line BV1-95 (115V) ice maker with Seafresh carbon filter, plus additional ventilation (2016). Serviced (2021).

WATERMAKER Blue Water Express XT Series AC watermaker - approximately 150 litres/33 Imp gallons/40 US gallons per hour (replaced 2022). 


7. TANKAGE AND PLUMBING

FUEL 1,400 litres approximately (308 Imp gallons/370 US gallons) in two GRP tanks. One 950 litres (209 Imp gallons/251 US gallons) tank installed under the deck saloon floor, and one 450 litres (99 Imp gallons/119 US gallons) tank installed under the forward cabin sole.
Fuel transfer pump filter. Serviced (2016).
Engine and generator set Racors parallel plumbed, so both can run off a single unit, with vacuum gauges and stainless steel drip tray.
Algae-X fuel polishing system for circulation polishing of fuel in main tank - FPS FX (600 litres per hour) with analogue timer. Serviced (2016).
Fuel and water tank breathers ‘swan-necked.’

WATER 950 litres approximately (209 Imp gallons/251 US gallons) in a GRP tank under the deck saloon floor.

TANK TENDER GAUGES BEP tank monitoring system for fuel and water tanks, with BEP 600-TLM gauge to enable levels in each tank to be monitored. Backup calibrated dipsticks with calibration chart.

HOT WATER From an insulated approximately 73 litres (16 Imp gallons/19 US gallons) tank heated by the engine’s heat exchanger, or by thermostatically-controlled, 1.25kW immersion heater element powered by the generator or dockside power. Hot water tank and associated pipework replaced (2016).

PRESSURISED HOT AND COLD WATER SYSTEM
Hot and cold pressurised freshwater system based on a high capacity water pump with PEX/PBT pipework and fittings. Freshwater system checked, pumps replaced with Marco U14 variable speed pumps and expansion tank replumbed (2016).
Seafresh charcoal water filter system on galley cold water supply.

HOLDING TANKS Two plastic (Polyethylene) toilet holding tanks installed for each head and plumbed for gravity discharge, with additional ability to pump out from deck using a shore station. Flexible pipework for both toilets replaced (2016). Tanks fitted with electric capacity gauges.

GREY WATER Showers and washbasins discharge into two sump tanks, one forward and one aft, which then evacuate via a dedicated electric Whale ‘Gulper’ pump directly overboard. Aft shower to grey water box pipe replaced and breather fitted (2016).
The galley sinks also empty via an electric Whale ‘Gulper’ pump.
These three pumps are each operated by Vimar rocker switches. All gulper pumps serviced (2016).

MANIFOLD SYSTEM Manifold for seawater inlets to reduce through-hull fittings. Softwood bung attached to every through-hull fitting.
Saltwater intake system serviced and items replaced, as necessary (2016).

 

8 . ELECTRICS

SHIP ’S SUPPLY 24V.

RING MAIN 220V/110V AC, US 4-wire circuit with nine double 110V US 2-pin (plus earth) outlet sockets located as appropriate within the layout.
Units are from the Vimar ‘Idea’ range with chrome ‘Classica’ surrounds.

OTHER ELECTRICAL SOCKETS 110V waterproof socket in lazarette.
110V socket in starboard aft deck locker.
220V socket (3-pin/60Hz) in galley locker for washing machine.
12V waterproof socket and plug in lazarette suitable for (35A) dinghy pump.
12V waterproof socket, including dropper (10A maximum) at pedestal for halogen spotlight.
12V cigar lighter type socket at chart table.
Additional 5A, 10A, and 15A circuit breakers (no dropper).

BATTERIES Domestic: 3 x 180Ah Mastervolt MLI ultra 24/5000 batteries.
Engine, generator and bow thruster start: Upgraded to 3 x 180Ah Mastervolt Li-Ion batteries. Replacement battery box to house start batteries, and cables to engine and generator lengthened (2016).
Battery venting hose ‘swan-necked.’
All batteries are positively secured against inversion in case of a knockdown.

BATTERY MANAGEMENT Charging of the domestic supply batteries is from the engine via the VW Iskra 110A alternator with Mastervolt Alpha Pro regulator.
Two Mastervolt 100A battery chargers.
MasterView Easy control panel at the main DC panel.
13kVA Isolation transformer with soft start for cruising in US.
Emergency link.

INVERTER Two 24/2500 (115V) Mastervolt MASS inverters.

SHORE POWER 50A dockside power cable, 4-core double insulated PVC, 18m (60’) in length.
US 4-core to Euro 3-core Hubbell socket in aft deck locker.
5m shower power extension lead. 

INTERIOR LIGHTING Overhead lights.
All headlining lights are Imtra ‘Ventura’ stainless steel, warm white LED type.
Extra Imtra ‘Ventura’ LED overhead lights with red lens cover - one at chart table and one in galley.
Cabin ‘Minor’ reading lights in stainless steel with white ceramic shade.
LED strip lights over outboard galley work surfaces.
LED strip light outboard of hullport blinds for ‘mood lighting’ in owner’s stateroom.
Automatic refrigerator door light.
Exterior dome lights in engine room.
Two LED lazarette lights (2016).
Flexible LED chart table light.
Dimmers to under deck and overhead lights in aft cabin and saloon.
All aft cabin lights controlled from both sides of berth.
Dimmers to under deck lights in forward cabin.

EXTERIOR LIGHTING Boom light over cockpit table.
LED upper and lower spreader lights (on all spreaders), switched at pedestal.
Remote activation of spreader lower downlights from dinghy. Remote activation of spreader uplights from dinghy.
Aqua Signal 41 bow and stern navigation lights.
Blue Water LED steaming light.
Aqua Signal ‘Kiel’ foredeck light, with remote control.
LED aft deck floodlight, mounted on antenna pole, switched at pedestal, with additional remote control.
Blue Water LED tri-white light at masthead.
Low-level courtesy lights in cockpit and aft walkway. 

 

9. NAVIGATION AND COMMUNICATION


COMPASSES Flush-mounted SIRS Major 150mm (6”) diameter steering compass with internal lighting and stainless steel crash bar to each pedestal top.

SAILING INSTRUMENTS By Raymarine.
Upgrade to i70s navigation units (2016) integrated with the chart plotter. Each multifunction is able to display, water depth, deep/shallow alarm, course over ground, sea temperature, current boat speed, speed over ground, average speed, trip log, total log, apparent/true wind speed, apparent/true wind direction.
2 x Raymarine ES127 HybridTouch multifunction displays (2016).
10 x Raymarine i70s displays.

RADAR/GPS AND CHART PLOT TER
Upgrade to Raymarine eS97 high performance navigation system with ClearPulse sonar, and Global Positioning System (GPS), interfaced to the autopilot at the chart table (2016). This unit also repeats sailing instrument information. 4kW Radome.
Echomax Active-XS dual band active radar target enhancer.
YB Tracking - YB3 Iridium tracker (2017).

AIS Raymarine AIS650 Class B AIS transceiver with dedicated antenna.

AUTOPILOT Upgrade to Raymarine Evolution automatic pilot system (2016) with twin Type 2 long 24V linear drive units, ACU400 course computer, and two p70s control heads (2016) fitted at each pedestal. This unit is installed independently of the main steering system and offers a backup to that system.
2 x Raymarine SmartControllers - remote wireless full-function automatic pilot controls, one fitted in charging dock and second used as spare.
Additional GPS antenna, deck mounted. Cable run to NG backbone adjacent to autopilot course computer. When required, cable for primary GPS can be unplugged and second GPS plugged in.

WINDEX Windex at masthead.

NAVTEX Furuno NX300 NAVTEX receiver, linked to NMEA GPS.
Raymarine SR6 Sirius receiver, HS switch and deck mounted antenna, including link to saloon stereo for Sirius entertainment system.

VHF RADIO Upgrade to Raymarine Ray260US VHF radio-telephone with masthead antenna, plus hailer/horn speaker (2016).
Additional second station with US handset and speaker in cockpit (2016).

SSB RADIO Icom IC-M801 SSB, including ATU130, dropper, and fist microphone.
Wide copper strip from chart table to lazarette and twin large ground plates as SSB earth.
Backstay insulators.

SATELLITE PHONE Upgrade to KVH TracPhone V3-HTS Mini VSAT system (2021).
Upgrade to Sailor 250 Fleet Broadband satellite phone linked to external antenna (2017).

INTERNET Upgrade to Pepwave 4G router with Wi-Fi (2021).

PC Upgrade to Nexcom industrial specification i7 PC (2017).
Upgrade to AG Neovo SX17+ 17” PC screen (2016).
MaxSea V4.1 navigation software (2021).
Upgrade to Synology DS414 NAS drive (2021). 

 

10. SAFET Y

LIFERAFT Winslow 8-person life raft with hydrostatic release. (Hydrostatic release replaced 2016).

RADA R REFLECTOR Echomax 230 radar reflector on mast.

BILGE PUMPS Jabsco Utility 3000 Puppy electric bilge pump with Par hydro air switch (rated at 3,000 litres per hour).
Henderson MkV manual bilge pump (rated at 135 litres per minute) operated from within the cockpit.
Additional Whale 9000 electric submersible bilge pump.
Each bilge pump is fitted with a Whale type filtered strum box.
All bilge pumps serviced (2016).

DECK SAFET Y White Ocean Safety horseshoe lifebuoy with light, drogue and bracket (replaced 2016).
6 x folding 8mm Wichard pad eyes in cockpit for safety lines.
Webbing jackstays (gold) to four folding pad eyes - two forward and two aft.
Emergency tiller. Serviced (2016).

FIRE EXTINGUISHERS Various including automatic fire extinguisher in engine bay with remote light.
Automatic engine bay extinguisher upgraded to manual operation.
Fire blanket in galley.
All fire extinguishers replaced - 4 x dry powder, engine room, and generator (2016).

ALARMS Gas alarm.
Smoke detectors.
Bilge high water alarm (different noise to engine alarm).

OTHER SAFETY FEATURES Hailer.
Watertight bulkhead and wooden door in fo’c’s’le.
Safety kill switch mounted at steering pedestal to allow isolation of powered deck gear, in the event of an emergency (2016).

 

11 . GENERAL

RIB/DINGHY 2014 Apex A-12 dinghy (12ft).
20hp Yamaha 4-stroke outboard with electric start.

WARPS AND FENDERS Four large heavy-duty fenders with lines attached.

CROCKERY Oyster customised Royal Doulton fine bone china crockery.

CUTLERY Oyster customised Robert Welch stainless steel cutlery.

SAFE 4-brick safe with digital keypad.
2-brick safe with digital keypad.

HEYCO MARINE TOOLKIT Large Heyco marine tool kit in sealed box.

ASSORTED TOOLS, SPARES AND MANUALS

 

Historical Damage Disclosure: In 2016 ‘ARBELLA’ ran aground in the BVI. Following the incident, the vessel was shipped back to her original builder - Oyster Yachts in Norfolk, UK, where she underwent repairs. At that time the owner took the opportunity to have an extensive refit and a number of significant upgrades.

NB: All personal belongings and all other items not expressly listed in the above inventory are excluded from the sale.
Viewing through Oyster Brokerage.
Inventory verified by the owner.
Issue 5 (GR/YY/jg)
In this case we are acting as Brokers only. Whilst every care has been taken in their preparation, the correctness of these particulars is not guaranteed. The particulars are intended only as a guide and they do not constitute a term of any contract. A prospective Buyer is strongly advised to check the particulars and where appropriate, at their own expense, to employ a qualified Marine Surveyor to carry out a survey and/or to have an engine trial conducted, which if conducted by us shall not imply any liability for such engine on our part. Life-saving appliances do not form part of the inventory and it is for the buyer to ensure they are in date and

suitable for their purposes. Buyers are advised to seek appropriate qualified advice with regard to the tax status of the vessel.
© 2022 Oyster Yachts

Show More…

Presented For Sale By:

Oyster Brokerage (USA)

Newport Shipyard
One Washington Street
Newport, RI, 02840
United States
+1 401 846 7400

View Seller Inventory
 

One-click Contact

X
* We weren't able to post your message, please check the highlighted fields and try again.

Thanks

We have sent your information directly to the seller.

Request cannot be completed

You may have entered incorrect information or the server is temporarily down. Please reload this page and try again later.

Presented For Sale By:

Oyster Brokerage (USA)

Newport Shipyard
One Washington Street
Newport, RI, 02840
United States
+1 401 846 7400

View Seller Inventory
 

One-click Contact

X
* We weren't able to post your message, please check the highlighted fields and try again.

Thanks

We have sent your information directly to the seller.

Request cannot be completed

You may have entered incorrect information or the server is temporarily down. Please reload this page and try again later.

Services

Advertisement
X