Presented For Sale By:
|Location||Bayou La Batre, Alabama, United States|
|Max Draft||1.27 m|
|Deadrise at Transom||17.5°|
|Dry Weight||28000 lb|
|Fuel Tanks||520 gal|
|Fresh Water Tanks||130 gal|
|Holding Tanks||50 gal|
|Hull Shape||Deep Vee|
|Hull Warranty||5 years|
OWNER RETIRING….. A state of the art 2008 42’ Tiara available for you! Powered with dual 715 HP Cummins; Vinyl, teak and oaks in the interior as shown in the pictures, as MUST SEE
Manufacturer Provided Description
With plenty of room for friends, family, and gear, the Tiara 4200 Open offers room to spare, allowing any Tiara owner to travel in style. An upper cockpit wetbar with sink, cutting board, refrigerator, and insulated cooler aft mean that the sportsman and cruiser alike will have enough room for preparation and storage of bait, fish and food. An automatic rope / chain anchor windlass system with operation from foredeck foot pedal and remote switch at the helm, ensures that in high or low seas, the captain will remain in control. Four 10-inch spring line cleats and two 6-inch fender cleats mean the 4200 can be tied up safely and securely. The 4200 Open features a hull and deck constructed with a gelcoat outer layer, hand-laid fiberglass and balsa core (deck and hullsides) with a special blended premium resin. The custom composite windshield frame, with tempered safety glass, offers safety handrails, power opening center section, and three washer / wipers. Tiara's custom 12V DC and 120V / 240V AC electrical system, 50 amp battery charger, and a 12V DC 2-bank battery system with gel cell batteries, ensures heavy-duty power. Power, performance and safety are important to any Tiara owner and the 4200 engine platform is no exception. The 4200 Open will run on either the CAT C12 engine platform, equipped with the CAT MPD engine display or the Cummins diesel engine platform, equipped with the Cummins C-Cruise engine display.
The 4100 Open features a transferable 5 year limited warranty on the hull. It is constructed with a water barrier outer gelcoat layer and hand-laid fiberglass with a special formulated resin. A material called “decolite” is used for stringer material, it is CNC cut and encapsulated with fiberglass and integrated into the hull. Engine beds are tech-lam or plywood reinforced. This process creates a solid backbone which gives the 4100 Open a superior ride and eliminates the weight of solid wood stringers. The seacocks and all underwater thru-hull fittings are made of bronze, and a hullside exhaust system is used. The 4100 has six optional oval opening port lights with screens for great ventilation and natural light while below deck. The 4100 features a hullside ventilation system and gelcoated boot line graphics.
CAT or Cummins available.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.