For Sale by


Lyman-Morse Boatbuilding Co.

84 Knox Street
Thomaston
ME
04861
United States

Fax:  (207) 354-8176

Contact Seller

2009 Lyman Morse "e" Sailing Yacht e33

US$125,000

Marblehead,MA,United States

Other Videos: 
  • Boat Summary
  • Full Details

Description/Condition

Agila has been finely tuned and fitted out for solo racing.  This lends itself very well to getting the most out of those afternoon sails when you don't have a lot of time.  The owner has had Lyman-Morse make a great number of improvements in the deck harware layout, cosmetics and systems.  Apparent in the asking price, this owner is not interested in have Agila set on the market for very long.  She is a great blend of high performance and easy daysailing or weekend vessel.




Boat Details
Fuel DieselHull Material Fiberglass 
Hull Shape Semi DisplacementBeam 2.67 m 
Max Draft 1.75 mMax Seating Capacity 8 
Engine Make YanmarEngine Model 2YM15 
Engine Year 2009Fuel Capacity 37.85 l 
Length at Waterline 8.23 mLength Overall 10.21 m 
Number of Heads 1Holding Tank Size 22.71 l 
Number of Berths 3Number of Engines 1 
Max Bridge Clearance 14.02 m    
Resources
For Sale by

Lyman-Morse Boatbuilding Co.

84 Knox Street
Thomaston
ME
04861
United States

Fax:  (207) 354-8176

Sails

2009 Square Top Main

2009 Cruising Spinnaker

2011 Roller Furling Jib

2011 “Chicken” (Heavy Air) Spinnaker with “Agila” Inlay (looks like an eagle)

2012 A2 Runner (Spinnaker)

2012 Code 0

Hull and Deck

-Two-tone gel coat deck finish  
-Biaxial e-glass with unidirectional reinforcing to ABS standards 
-Vinyl-ester resin system throughout hull, deck, and structure 
-Antimony lead fin keel with large bulb and deep sump for keel bolt access 
-Teak toe rail and exterior companionway trim, varnished finish 
-(4) Molded custom portlights in cabin house 
-16' ergonomic cockpit with (4) scuppers to CE standards 
-Cockpit lazarette locker with flush-molded hatch 
-Foredeck anchor locker with flush-molded hatch 
-Molded hull structure, interior liner, and chainplate knees, gelcoated white

Spars and Rigging

-Custom shaped tiller with tiller extension 
-Autoclave-cured, tapered, high performance, braided carbon fiber mast 
-Aluminum boom with integral reef point, mainsheet fine tune, and outhaul

Interior

-White gelcoat finish with oiled teak highlights 
-Teak and holly cabin sole 
-Jabsco marine toilet under flush hatch 
-3" foam settee cushions with choice of Sunbrella fabric 
-Igloo white cooler / lower companionway step 
-Port and starboard lockers for electronics/storage 
-(4) Access panels below settees 

Mechanical Systems

-Yanmar 2YM20-SD20, 14hp Saildrive w/ Gori 2-blade folding propeller 
-Engine panel and throttle control in cockpit 
-10 gallon stainless steel fuel tank with inspection plate and gauge 
-High aspect ratio Eglass rudder 
-Jefa aluminum rudder stock and composite bearings

Deck Hardware

-Custom aluminum foil section swept back double spreaders 
-Harken sheaves and Spinlock line clutches throughout 
-Awlgrip finish on mast, boom and spreaders 
-Harken traveler system 
-Bonded Luff Track and battcars for mainsail 
-Stainless mooring points (cleat, padeyes, chocks). 
-Continuous standing rigging for easy tuning at deck level 
-Slim line fore deck hatch 
-316 stainless steel fittings and 1x19 stainless standing rigging 
-Companionway hatch with double slider 
-Custom 316 stainless steel chainplates 
-Magnetic compass 
-Sailtec hydraulic headstay with remote panel in cockpit 
-Vang-Master boom vang - no topping lift required

Electrical and Plumbing

-Jib furler below deck 
-ABYC standards throughout 
-Complete running rigging package, including lazy-jacks 
-(2) 100 amp 12VDC marine battery 
-No winches - Sails controled by macro & micro sheeting systems. 
-(1) 12VDC battery switch and Blue Sea distribution panel 
-Spartite kit for partners 
-(2) Cabin lights 
-G10 mast step 
-(1) Cockpit-mounted manual bilge pump 
-(1) Holding tank plumbed for pump out 

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Custom Contact Information

Please contact Scott F. Layton for additional information or to schedule a showing.

Mobile: (207) 701-1235

Email: scott@lymanmorse.com